Visit The Dirt Forum for More Information


Note: This is an archived topic. It is read-only.
  The DIRT Forum
  PureStock/Bomber Tech
  Chassis Geometry

profile | register | preferences | faq | search



This topic was originally posted in this forum: Modified Tech Talk
Author Topic:   Chassis Geometry
DirtTrackRacingRules 3 8
Member
posted April 21, 2004 03:57 PM     Click Here to See the Profile for DirtTrackRacingRules 3 8     
What Chassis has the best front end geometry?


zeroracing
Member
posted April 21, 2004 04:11 PM     Click Here to See the Profile for zeroracing     
i have heard ford stubs do, like a crown vic.
old chevelles are popular and seem to be good.
metrics kinda suck. but i have a metric and dont care.
any of them are close enough. the fast stuff is in the rear.


dirtbuster
Member
posted April 21, 2004 04:21 PM     Click Here to See the Profile for dirtbuster   Click Here to Email dirtbuster     
I wouldnt just say any of them are close the fast stuff is in the rear. Some are better than others. The chevelle are pretty good but still need work. Have heard the crown vics are close but not quite as good as teh chevelles. They can all be made to work some just take more to get there than others.


zeroracing
Member
posted April 21, 2004 04:56 PM     Click Here to See the Profile for zeroracing     
most all the fast stuff is in the rear. as long as you try to minimize the caster gain then you will be fine. and your bump steer is not super off.
but most the stuff that makes a mod handle and fast is in the rear.


Back to the Archives