Visit The Dirt Forum for More Information


Note: This is an archived topic. It is read-only.
  The DIRT Forum
  PureStock/Bomber Tech
  mounting seat

profile | register | preferences | faq | search



This topic was originally posted in this forum: Modified Tech Talk
Author Topic:   mounting seat
dirtbandit
Member
posted April 21, 2004 11:55 AM     Click Here to See the Profile for dirtbandit     
How do you guys mount your seats? I need all the room i can get and need to mount it as close to the floor as possible and all the way back. The frame does not have any brackets other than for the lap belts. Any suggestions would be greatly appreciated.

Thanks,

Dirtbandit


NJantz
Member
posted April 21, 2004 12:01 PM     Click Here to See the Profile for NJantz     
My seat is mounted at the bottom with two formed straps that attach the seat to the tabs that are welded to the frame. The straps are formed 1/4" thick steel.

My lap belts use the same frame tab hole as the seat attachment straps do.

The seat is also bolted straight to a welded frame tab at the top.

[This message has been edited by NJantz (edited April 21, 2004).]

Back to the Archives