posted April 18, 2004 09:56 AM
I am looking for a 1" extension to put on a 9" bilstein shock any help would be appreciated
posted April 18, 2004 06:31 PM
I don't know if Bilstein sells one. I'm sure that they do, but I got one from Allstar Performance. Part# 60096 is a 1" extension. Hope that helps
posted April 23, 2004 08:32 PM
Had the same problem with my Bilstiens. Just go to your local race shop and buy a 1/2 female heim. Take the one off the shaft side of the shock and put the longer one on. The 1/2 heims are about 3/4 longer then the bilstein one.
posted April 23, 2004 09:20 PM
make sure its metric thread though? an easy way to make one is ..forget to tighten the lower nut on the lr and after about 5 laps you'll have a 2 piece shock and have a piece of shaft and a rod end......