Visit The Dirt Forum for More Information


Note: This is an archived topic. It is read-only.
  The DIRT Forum
  PureStock/Bomber Tech
  Wheel hop during acceleration 4bar/zlink

profile | register | preferences | faq | search



This topic was originally posted in this forum: Modified Tech Talk
Author Topic:   Wheel hop during acceleration 4bar/zlink
rdirt
Member
posted April 11, 2004 02:52 PM     Click Here to See the Profile for rdirt   Click Here to Email rdirt     
Just switched to 4/z setup,track was kind
of tacky I my car would hop coming off the
corner under acceleration.Im thinking I had
to much pull bar angle 25 deg short single
biscut(Red) speedway type pullbar.
Chassis set 60 lbs wedge
200 spring behind ls on birdcage
175 on top of axle rs z link
short pan behind diff centered
Shocks are good cond.
Thanks Rick
Thanks Rick


dirtracer14
Member
posted April 11, 2004 03:51 PM     Click Here to See the Profile for dirtracer14   Click Here to Email dirtracer14     
Was it wheel hop or was the car bouncing? If it was bouncing than you have to much bite and its pinning the rear to the underslung only giving you the air in the tires for suspention... if it was wheel hop do you have a toplink shock???


Back to the Archives