Visit The Dirt Forum for More Information


Note: This is an archived topic. It is read-only.
  The DIRT Forum
  PureStock/Bomber Tech
  pinion angle

profile | register | preferences | faq | search



This topic was originally posted in this forum: Modified Tech Talk
Author Topic:   pinion angle
jwracing48612
Member
posted April 10, 2004 07:47 PM     Click Here to See the Profile for jwracing48612   Click Here to Email jwracing48612     
whats the easiest way to set pinion angle i have a four bar car with a pull bar and a 9"inch rear end thanks
jwracing

------------------


jwracing48612
Member
posted April 13, 2004 09:20 PM     Click Here to See the Profile for jwracing48612   Click Here to Email jwracing48612     
there has to be someone in this forum that knows how to set pinion angle please help jwracing


FASTLAP
Member
posted April 14, 2004 03:16 AM     Click Here to See the Profile for FASTLAP     
I usually set the car on the scales (grain scales) while its sitting on its own weight, crawl under with a magnetic angle finder, use the area under the pinion shaft to measure. 6* negative ought to work.


FASTLAP
Member
posted April 14, 2004 03:17 AM     Click Here to See the Profile for FASTLAP     
oh, use your pull bar to set angle.....


NJantz
Member
posted April 14, 2004 06:05 AM     Click Here to See the Profile for NJantz     
Do a search on this forum for "pinion angle" and you'll find several topics discussing this.


jwracing48612
Member
posted April 14, 2004 11:08 AM     Click Here to See the Profile for jwracing48612   Click Here to Email jwracing48612     
thanks for the info guys i was thinking that would be the way u did ive only worked on a late model that had a lift bar so all this mod stuff is very new to me thanks jwracing

------------------


Back to the Archives