Visit The Dirt Forum for More Information


Note: This is an archived topic. It is read-only.
  The DIRT Forum
  PureStock/Bomber Tech
  KSE tandem pump?

profile | register | preferences | faq | search



This topic was originally posted in this forum: Modified Tech Talk
Author Topic:   KSE tandem pump?
Xtrem4U
Member
posted April 09, 2004 09:23 PM     Click Here to See the Profile for Xtrem4U     
I bought a used kse tandem pump. Does it take a special mount to mount it to the water pump? The mount I got with it is a flat mount with two holes- one hole adjustable?


KK17
Member
posted April 09, 2004 09:29 PM     Click Here to See the Profile for KK17     
Sounds like you got the mount for mounting it to a bellhousing....I run mine off the bell and thats what my plate is ....I've never run it off the water pump so I can't say for sure but I dont think the bracket would be flat unless their is a two piece bracket


21dirtracernw
Member
posted April 10, 2004 08:03 PM     Click Here to See the Profile for 21dirtracernw   Click Here to Email 21dirtracernw     
quote:
Originally posted by Xtrem4U:
I bought a used kse tandem pump. Does it take a special mount to mount it to the water pump? The mount I got with it is a flat mount with two holes- one hole adjustable?

Hey I run the kind of setup that you ae trying to setup and the post before me was right tht is for a bellhousing setup. Your mount should have 2 holes that mount to the water pump and 1 on the top of the kse and 1 on the bottom to adjust the tension of the belt. What ever you do when you get it setup don't I repeat don't have your belt to tight or your will throw it right off.
hope this helps you...


Back to the Archives