Visit The Dirt Forum for More Information


Note: This is an archived topic. It is read-only.
  The DIRT Forum
  PureStock/Bomber Tech
  Bearing number?

profile | register | preferences | faq | search



This topic was originally posted in this forum: Modified Tech Talk
Author Topic:   Bearing number?
99EMBREY
Member
posted April 06, 2004 10:04 AM     Click Here to See the Profile for 99EMBREY     
Anyone know the bearing number for a rear hub on an afco 9". The inner and outer are the same, but my numbers are wore off.


KK17
Member
posted April 06, 2004 09:14 PM     Click Here to See the Profile for KK17     
you're better off just to call afco or one of their dealers, much cheaper than buying one from the parts store..


joeltjen
Member
posted April 06, 2004 11:14 PM     Click Here to See the Profile for joeltjen   Click Here to Email joeltjen     
he's right! go straight to afco. you will get them for less then half of what a bearing house would want and about 60% cheaper then napa or other parts stores. not knocking napa here but thats what i've found.


norightturn
Member
posted April 07, 2004 08:30 AM     Click Here to See the Profile for norightturn     
Napa actually sells a bearing line comparable to the bearing afco sells. It is the napa PGB line which is their cheaper line of bearing. The bearings napa sells in their top line is made by SKF and is a top quality bearing. You should be able to carry your bearing to napa and tell them you want it in a PGB bearing. The price and quality should be comparable to the afco price.


Back to the Archives