posted October 10, 2004 05:27 PM
Changed pistons and rods in my 406, from 5.565 to 5.7 now when I put the same cam I had in I am hitting. I moved the cam up 3 degrees, retarded it 3 and still hitting.Any suggestions?
posted October 10, 2004 05:32 PM
Did you clearance the end of the rod bolts on the 5.7 rods?
posted October 11, 2004 10:24 AM
No, I sure didn't, I guess I will have to , Thanks
posted October 11, 2004 12:29 PM
or use a small base circle cam