Visit The Dirt Forum for More Information

Author Topic:   how do you know?
allan
Member
posted September 05, 2004 10:24 AM
In the middle of the lifter where the pushrod goes if it is hydraulic you should be able to push it down, of course we had an old motor we tore down and they felt solid because of how bad of shape they were in. You can also remove the little snap ring on top and tear them apart.


allan
Member
posted September 05, 2004 02:20 PM
one other way to tell look at the back of the block and see if they had put oil restrictors in it you can't run a hydro with restrictors as far as tech goes all you have to do is push on the rocker arm and see if it gives to tell what it is


allan
Member
posted September 05, 2004 04:33 PM
ok guys, got one apart defintley a hydraulic lifter,thanks.


Back to the Archives