Visit The Dirt Forum for More Information

Author Topic:   Cam Identity help ?
Kromulous
Member
posted July 15, 2004 08:50 AM
Got a old mech Roller cam that we found in the garage. Tagged with some specs but no maker or part number. Need some help identifing it please.

The only numbers i see on it are as follows:

119606-9612A

(There may or may not need to be a dash inbetween the 9612A)

Kromulous
Member
posted July 15, 2004 12:36 PM
Talked to Crane cams today and the 119606 number is just a casting number. So i guess the grind number would be 9612A.

Looking on all the manufacturers sites and cant find that kinda number anywhere. So i'm out of ideas to find the Mfg now.

Anyway Crane says they can regrind it, or trade it in as a core. So i thought i might do that.

Any ideas on a good mech roller grind for a 363 (9/16th's motor) in a modified? I'll post the specs here, thanks for any input.

363 cubes (4340 bottom end)
Dome forged pistons (13.0 to 1 or 13.5 to 1)
Dart Pro 1 heads (215cc, 64cc & 2.05 / 1.60 v's)
Edelbrock 2925 intake
1-7/8 step tube headers
750 cfm 4150 Holley (on alky)

Hoping to stay under 7500 rpm, and we usually run 1/4 to 3/8 mile tracks. Except one 1/2 miler. Just looking for a good cam to complete the motor.

Dman
Member
posted July 20, 2004 09:45 AM
Try crower with that part number.


Back to the Archives