Visit The Dirt Forum for More Information

Author Topic:   100 Dome-305 heads
flatfoot27
Member
posted July 11, 2004 05:54 PM
Can someone tell me if I run a 100 dome piston, will the 601-305 heads have enough clearence and will stock rods hold up tp this much compression?


Raz_900
Member
posted July 11, 2004 07:50 PM
I haven't tried it, but from what I remember of the 601s I had, you'll probably have to clearance the dome or chamber a bit. The 601 heads are pretty small.


bigcityracer
Member
posted July 12, 2004 05:59 PM
I just built and ran my 355 with the 305 heads. Had no problems at all. I run the 450 with the .100 dome pistons.


Back to the Archives