Visit The Dirt Forum for More Information

Author Topic:   powerglide
robhbk24
Member
posted July 04, 2004 01:04 PM
IF YOU REMOVE THE INPUT SHAFT. A 1.82 SHAFT IS 12 5/8 INCH LONG AND A 1.76 SHAFT IS 12 7/8 INCH LONG.THAT IS IF THE TRANSMISSION WAS NOT REBUILT AND THE WRONG INPUT SHAFT PUT IN.
THE BEST WAY IS TO CHECK THE OUTPUT SHAFT IF YOU HAVE THE 27 SPLINE SHAFT, A 1.82 GEAR WILL HAVE AN OUTPUT DIAMETER OF 1.145 AND A 1.76 GEAR WILL HAVE AN OUTPUT DIAMETER OF 1.170.


Back to the Archives