Visit The Dirt Forum for More Information

Author Topic:   434 heads?
Darkside1
Member
posted June 28, 2004 10:24 PM
anyone know anything about these? I looked at a set and was thinking about getting them. All i know is they are 64cc heads.


OLSONRACECARS
Member
posted June 30, 2004 10:22 PM
Saw a set today they have some pretty small runners, so I dont think they would flow very well but would give you better compression


ruggs66
Member
posted July 05, 2004 10:01 AM
those are 305 heads.

you would need bigger valves put in them to use them on anything bigger than a 305.

tilley88
Member
posted July 06, 2004 02:56 AM
HiPo 305 heads, 58-60 cc. Small intake runners, tho.


wrenchturner10
Member
posted July 06, 2004 08:16 PM
We have a set of 434's that were reworked by the engine store. They flow 200 cfm @ .500 lift the price was about $500. they have 2.02 intakes and 1.60 exhaust, stainless valves, good springs and hardened retainers with umbrella seals. I don't have the phone number' but go to theenginestroe.com for the number and talk to Kent. Also the dome was hogged out to increase the flow. Not bad heads for a small budget team. We added the screw in studs and guide plates to reach the $500 mark.


Back to the Archives