Visit The Dirt Forum for More Information

Author Topic:   ford 351c heads
posted June 16, 2004 10:41 PM
I am currently looking into fitting a 4barrel carb on my 2V motor. I know to do that I have to switch heads and intake to keep it all stock which is what my rules say. I have heard alittle about aussie 2V heads which they say are really good heads, but pricey. I don't know what intake they use. Any help would be very helpfull. Also if you have 4V heads for sale let me know. Thanks

posted June 17, 2004 12:27 AM
I have 4v heads for sale and intake. Also look on ebay because from time to time there is Aussie 4 v cast intakes with the 2 v port sizes that fit Aussie or Us heads.

posted June 17, 2004 04:37 AM
you can swap a stock 351c-4v intake onto a 351c with 2v heads. there is a port mismatch, but it's do-able. it's been a while, but if i recall correctly, you need to use the 4v gaskets.

posted June 17, 2004 06:09 AM
The Aussie heads are really nice, they have the small comustition chambers of the 4v heads, and just slightly larger ports than the 2v heads. I beleive the aussie heads run a 2v intake, or one thats made for them heads.

Check on ford motorsports web site on more info about them. There are a few ford msg boards out there that may be able to help.

Back to the Archives