Visit The Dirt Forum for More Information

Author Topic:   alky jets
FASTLAP
Member
posted May 23, 2004 12:24 PM
On average, what primary and secondary jets are used for a 750 alky carb? It's a 355 roller motor, alum heads (supr spec type) turning about 7500. Thanks for any advice


chomme
Member
posted May 23, 2004 01:20 PM
Depends...are you talking the HP type with the larger jets or a 4779 type with the holes drilled above the jets?


chomme
Member
posted May 23, 2004 09:44 PM
On my 80535 (750hp alky)...I run 144 primary and 144 secondary...on my C&S aerosol billet (800 cfm) I run 96's primary and secondary (that is one that is drilled). Hope that helps.


FASTLAP
Member
posted May 24, 2004 05:32 AM
chomme, ya know I'll have to check that out. I haven't paid much attention to that. I appreciate the info. Thanks!


Back to the Archives