Visit The Dirt Forum for More Information

Author Topic:   For KP
racerman707
Member
posted May 16, 2004 12:53 PM
I have a Motorcraft carb off of a 400 big block Ford 2 bbl. Would this be too big for a 2300 Ford? What's the cfm on these carbs? Thanks in advance....we've been running a 500 Holley but I don't like it.


BIGG C
Member
posted May 16, 2004 01:44 PM
Look on the side of the floatbowl for a number. Example 1.08, 1.12, 1.23,etc. The bigger the number, the bigger the cfm. Talk to KP or earl Parker website,alot of good info is listed. BIGG C

------------------


Back to the Archives