Visit The Dirt Forum for More Information

Author Topic:   SBC head questions
MiPinto6
Member
posted April 19, 2004 03:27 PM
I was checking on all the heads I have laying around the shop to see what was good and what I should junk. I have a turbo head (291) which I wrecked the mate and was looking to see if I could match anything to it. Is the 186 powerpack heads a match?

Also found a set of 461's. Mortec.com shows these as 327 heads with 62cc chambers but the tool box here says they are 64cc. Anyone know for sure?

And last, I found 4 sets of 882's. Are they worth keeping? Are they a good back up head?

Ant help is appreciated.

------------------
Thanks, Rob
(Cold Blooded Racing)


joetaylor
Member
posted April 19, 2004 03:34 PM
no

64

with port work they are a real good head with a dome they are a 76cc chamber

------------------
U LIFT U LOOSE


MiPinto6
Member
posted April 19, 2004 05:01 PM
What would be the better heads 461's or 186's? Probably run on a 406 with flat tops.

------------------
Thanks, Rob
(Cold Blooded Racing)


joetaylor
Member
posted April 19, 2004 07:02 PM
461 is prom for cracks I would go with 186 for a 400 the 61 would be better on a 350 just my experence


racer17j
Member
posted April 19, 2004 11:35 PM
the 882's aren't to bad thats all i have ever ran on my 350 flat tops gotta get them checked over real good tho pretty crack prone


Back to the Archives