Visit The Dirt Forum for More Information

Author Topic:   HEI Question
racenmotorsports
Member
posted April 07, 2004 07:00 PM
I got an HEI out of an old chevy motor. The thing looks good without too much play in the shaft. The problem is this thing camo out of a van with a computer (late 80's). Anyway, there's no vacuum advance thing or advance weights on it and the modulator has 2 pins on one end and 5 on the other. I can get an advance kit and a modulator with 2 pins on each end. What else do I got to do to make it work? Money is getting low, so we don't want to buy a new one if we don't got to (we'll do that later in the season).


rico 08
Member
posted April 08, 2004 02:01 PM
I don't see why it wouldn't(changing modules),except the advance weight kit won't work if it doesn't have any.


NJantz
Member
posted April 08, 2004 02:12 PM
racin if you want I have cores that I sell for 15 + shipping I will send you one I will save you alot ov messing arround

------------------
U LIFT U LOOSE


Back to the Archives