Visit The Dirt Forum for More Information

Author Topic:   1.46 valve springs
racer17j
Member
posted March 20, 2004 01:29 PM
just picked up a new motor the other day and found out it has 1.46 springs on it. it was run with a midwest#8 cam i'm switching it to a 510/510 244/244@.050 108 centers hydro cam since i have to run hydro camm will they work with this cam or should i switch them back to the z-28's like i've been running on my other motors just don't want ot mess with them if i don't have to but don't want to run into problems down the road if they are to heavy or something


UNVRNO
Member
posted March 20, 2004 04:57 PM
will i still be able to run stock dia springs without any mods or do i have to get spacers or something to put z springs on her


UNVRNO
Member
posted March 26, 2004 02:45 PM
ok i put them on as is with the big springs if they are to heavy will that limit my rpm's i took her out in the pasture the otherday and would only turn 6 grand it was raining so i was pretty much just spinning the tires the valves never floated but just got to 6 and stoped last year in a pretty much bone stock motor it turned 6800


Back to the Archives