Visit The Dirt Forum for More Information

Author Topic:   valve spring retainers??
fast_crew
Member
posted March 19, 2004 08:10 PM
need some thoughts on sring retainers and locks 7deg or 10 deg? springs are dual with 370 open pressure probably gonna be steel retainers ($$) cam is .555 lift turning 7-7500rpms isthere a weight savngs at all between the 2.

Thank alot josh k

ctfarm
Member
posted March 19, 2004 09:53 PM
Use the 10's and be done with it.I have'nt had much luck with 7's on dual springs at high rev's.If weights a concern, use titanium retainers,they'll last forever.


sdhnc29
Member
posted March 19, 2004 10:43 PM
Personally I would not use std. 7's or 10's. Use the Super 7's. The retainers are available in both titanium and steel, and so are the keepers.

Steve

------------------
Hendren Racing Engines
Rutherfordton , NC
(828)286-0780
Check out my other business at www.solemnvow.com A special thanks to jammin for the awesome job he has done for me on this site!!


fast_crew
Member
posted March 20, 2004 02:59 PM
I was thinking about using the comp. cams 10* super locks. to heavy u think??

Thanks alot josh K.

Back to the Archives