Visit The Dirt Forum for More Information

Author Topic:   Oil Pump stud torque
RACEINMUD
Member
posted March 16, 2004 11:01 AM
Hi, no info with stud. What would be the torque setting on my oil pump stud for the block and the nut to hold pump? Thanks for the help! Race


littleb24f
Member
posted March 16, 2004 11:27 AM
65 ft lbs, just make sure that it doesn't bottom out in the cap. It'll push on the bearing and make a high spot. I use a little lock tight on mine. Use and allen wrench to hold the stud and get it really snug with an wrench, then torque it.

[This message has been edited by littleb24f (edited March 16, 2004).]

Back to the Archives