Visit The Dirt Forum for More Information

Author Topic:   Distributor gear problem
34Racing
Member
posted March 07, 2004 10:32 AM
How much space do you have in the button? The other thing is the dist depth...i had this problem a few years back and had to get a slip coller dist so set the correct depth.


Okie11m
Member
posted March 07, 2004 11:23 AM
It is prob. dist depth.


chomme
Member
posted March 07, 2004 03:18 PM
had the same trouble, too much end play on the cam,along with high oil pressure .went to a bronze gear(solid cam)took the end play out of the cam, kept the high oil pressure with no more trouble. use the water pump with the cam adjuster bolt hole as there a lot of junk front covers on the market nowadays. and yes check your dist. depth.


34Racing
Member
posted March 10, 2004 01:51 PM
I would like to thank everyone for their good information. The one with the web site to performance distributors really helped me the most in figuring out how to set the height properly. I will hold on to this information and use it from now on.


Back to the Archives