Visit The Dirt Forum for More Information

Author Topic:   Heater hose inlet/outlet?
4d_POWER
Member
posted March 03, 2004 07:22 PM
351W

I've got the heater hose inlet and outlet
blocked off with a peice of hose with a bolt in it, it seems like it works, do you do anything different?

One outlet is 3/4", the other is 5/8.

Thanks

joetaylor
Member
posted March 03, 2004 07:29 PM
tap them both for pip plug then you don't have worrie about any leaks

------------------
U LIFT U LOOSE


outlawstock17
Member
posted March 03, 2004 07:35 PM
i use an aftermarket water pump with the hose fittings already tapped and plugged. i tap and plug the thermostat housing like joe said.


dirtracer7
Member
posted March 09, 2004 05:16 AM
Hey outlaw I was thinking of running a hose from the back of the intake to one of those heater hose nipples.Do myou think it would help cooling?


outlawstock17
Member
posted March 09, 2004 07:08 AM
if you're not having overheating problems i wouldn't mess with it. more hoses = more potential problems. personally, i've never done it. maybe someone else could help...


NWModracer
Member
posted March 10, 2004 12:57 PM
Yea I guess your right don't fix whats not broke.


Back to the Archives