Visit The Dirt Forum for More Information

Author Topic:   H bearings
racer1m2000
Member
posted February 19, 2004 12:14 PM
Do you have to run H bearings with a scat crank. What does a scat weigh compared to a stock


joetaylor
Member
posted February 19, 2004 03:44 PM
yoiu can run 'p' bearings if you don't run over 4500 rpm the 'h' bearing takes mor punishment I ran p once will never do it again bottom only lasted for 2 races then I bought a crank and 4 rods and didn't race for 4 weeks waiting for machine shop not fun

------------------
U LIFT U LOOSE


dirtbuster
Member
posted February 19, 2004 03:57 PM
You can run 'p' bearings with the stock replacement cranks, but I think on the 9000 series and all of the forged you have to run the 'h' because of the larger fillet radius.



Hobby152003
Member
posted February 19, 2004 07:46 PM
What is actually the differance in the H and P series?


Back to the Archives