Visit The Dirt Forum for More Information

Author Topic:   Roller Rockers??
fast_crew
Member
posted February 18, 2004 06:27 PM
Looking to get a set of ruller rockers probably 7/16 stud not sure on ratio or brand yet running a 358 w/13-1comp, w/p sr turquer heads 2.02/1.60 with a isky#201548 cam with 259/263 @.50 .548/.555lift specs are with a 1.5 rocker. turning 7000 rpms Wondering what you guys would recomend for ratio . And brand looking for someting good but not outragously priced. Anyone runing harland sharps What do you think of them??

Thanks alot Jos K.

dirtbuster
Member
posted February 18, 2004 06:56 PM
We have ahd good luck with Scorpions. Seems like I saw them for around $200.


Racer X
Member
posted February 18, 2004 07:01 PM
I'm running a set of steel roller tip rockers on my motor's. got them from speedway i think for 100 bucks not sure. and yes i have a 13to1 motor and buildin a 10.5to1 back up motor.


Speed Racer X
Member
posted February 18, 2004 07:14 PM
Ive ran Harland Sharps for years with no problems the only rockers Ive had problems with are the silver vacuum cast crane rockers..... good luck......Towman

[This message has been edited by towmandan (edited February 18, 2004).]

joetaylor
Member
posted February 19, 2004 03:54 PM
I have run the summit blue for about 8 years still work great and with no promlems last I checked they were about 150

------------------
U LIFT U LOOSE


Back to the Archives