Visit The Dirt Forum for More Information

Author Topic:   Where to get steel main caps?
dirtracer14
Member
posted February 04, 2004 08:42 PM
I am looking for the main caps for a 350 that bolt right into the 4 bolt holes with no drilling...anyone use these and were did you get them at what price? Thanks, Craig Moore


sixwillwin
Member
posted February 05, 2004 11:58 AM
I have a used set I could part with. Just the middle three caps. I dont know the brand, just that they are aftermarket steel caps.


dirtracer14
Member
posted February 06, 2004 12:58 AM
do you have to drill to put em on or do they replace the stock caps?


Racer14K
Member
posted February 06, 2004 09:29 AM
If they are made for a stock 4-bolt block they will bolt right up but you will still need to have them fitted and the block lined bored.


sixwillwin
Member
posted February 06, 2004 09:37 AM
what Racer14K said is correct............


Back to the Archives