Visit The Dirt Forum for More Information

Author Topic:   casting #s
joetaylor
Member
posted February 03, 2004 08:49 PM
does any one know the casting # for the gm pink rods. I don't want to get burned thanks


Ego Racing
Member
posted February 03, 2004 09:20 PM
The main things are as follows The main beams will be .575 inches think (standard are .500 inch thick) Just inside the rod nut on the bearing cap the letter O generally is an LT1 rod. Most Pink rods are not pink it was a die used in the MFG Process but most were floating pins.


midmod34
Member
posted February 04, 2004 05:31 AM
Go to mortec.com it lists all gm casting numbers and gives a discription


Ego Racing
Member
posted February 04, 2004 11:07 AM
Rods do not have a casting number on them


Back to the Archives