Visit The Dirt Forum for More Information

Author Topic:   ford oil pan
dirt poor racing
Member
posted January 27, 2004 05:07 PM
we run a 302 ho in banditt class pretty much stock motors we have done a few upgrades and should turn around 5700-6500 rpm on an 3/8 banked oval we run a windage trey with high volume oil pump we modified oil pan with right side baffles about 1 1-4" wide by 8" on a downward slope will this be sufficient or should we s****e up the 300+ $ for a pan. THANKS...


yamaha
Member
posted January 27, 2004 09:20 PM
302's are a lost cause, I'd run a windsor if you can. but thats just my opinion, I could be biased.


Sweek7
Member
posted January 27, 2004 09:22 PM
hey dirtpoor I run a 347 in a 77 ltd frame with the motor set back.I had a pan made when I set the motor back it cost about 25 bucks more than the standard pan.Try kevko racing oil pans 1-800-770-3557 or www.kevko.net you can problably get a pan and pickup for around 200.00


outlawstock17
Member
posted January 28, 2004 06:20 AM
kevco makes some nice ford oil pans. i found a brand new one for a 302 with the pick-up on ebay for $75 + shipping! sa-weet!


dirt poor racing
Member
posted January 30, 2004 08:42 AM
THANKS FOR THE INFO..i'll give them a call.


dirt poor racing
Member
posted January 30, 2004 02:38 PM
GAVE THEM A CALL NEW 7 QT PAN 150$ THANKS..


Back to the Archives