Visit The Dirt Forum for More Information

Author Topic:   ? for Steve
rickb33
Member
posted January 20, 2004 11:58 PM
The 2.055" will work better in every application, provided you are allowed to unshroud the chamber and blend the pocket area under the valve. If your not allowed to make these modifications by your rules, then I would use the 2.020".

As for your cam question, the max lift has very little meaning compared to the duration that you would be able to run. So your question would actually open up a ton of questions about your engine, car, and track.

Steve

------------------
Hendren Racing Engines
Rutherfordton , NC
(828)286-0780
Check out my other business at www.solemnvow.com A special thanks to jammin for the awesome job he has done for me on this site!!


iowa_dirt_track_girl
Member
posted January 21, 2004 05:31 PM
Rick i have a very good cam that works very very well on that size of track well it should anyways i won three track championships with it and your engine combo are you running 9 to 1 comp??
e-mail me for the cam numbers


rickb33
Member
posted January 21, 2004 10:12 PM
Dirt track girl,and Steve.I sent you a Private message.


Back to the Archives