Visit The Dirt Forum for More Information

Author Topic:   INTAKE AND HEADS???
BIGDADDYBOZ
Member
posted January 11, 2004 11:54 AM
I bought a 383 with Dart Iron Eagles on it with 215cc Runners and a Team G Intake. I tried to put my Performer Intake on it and it won't line up sits down alot you have to lift the intake up about 1/8 of a inch to make it look close. The guy said they were new heads never milled. Any help would be appreciated Thanks


BIGDADDYBOZ
Member
posted January 11, 2004 09:50 PM
Any Ideas?


Rollin Thunder
Member
posted January 12, 2004 05:50 AM
The Team G isn't legal.


dirtbuster
Member
posted January 12, 2004 11:56 AM
Were you just trial fitting it or actually assembling it? If it was just a trial did you have a gasket in place. That 1/8" sounds about like the thickness of a gasket if it were missing? Ive done that as well just set an intake on their and it doesnt even look close but get the gaskets on and its fine.

just at thought.

stevenwm
Member
posted January 14, 2004 11:51 AM
I bought a 383 with Dart Iron Eagles on it with 215cc Runners and a Team G Intake. I tried to put my Performer Intake on it and it won't line up sits down alot you have to lift the intake up about 1/8 of a inch to make it look close. The guy said they were new heads never milled. Any help would be appreciated Thanks


Steven comments:
I had the same problem and I used two fel pro intake gaskets part #F1205 and that solved my problem.

Steven.

Back to the Archives