Visit The Dirt Forum for More Information

Author Topic:   pistons
boas51
Member
posted December 13, 2003 01:57 PM
i have a cheap set of silovlite 30 overs not sure the specs on um but they are flat top 4 reliefe and a set of rings it's get rid of pretty reasonable


boas51
Member
posted December 15, 2003 07:20 AM
Federal Mogul/Sealed Power makes one for the 350LPG natural gas engine, part #399P. It has the 1.560"CH flat head with 2 valve relief, 2-5/64" compression rings, 3/16" oil ring. Perfect Circle/Dana makes it also, set #TC1863 and individual #224-1863. I don't know what the difference would be between the LPG piston vs. the gasoline piston but it looks like everything else in the engine is the same (timing set,cam,rods,head components). You may need to check with a machine shop or maybe Steve Hendren could tell you.

[This message has been edited by Racer14K (edited December 15, 2003).]

boas51
Member
posted December 15, 2003 06:53 PM
mine are #1436


Back to the Archives