Visit The Dirt Forum for More Information

Author Topic:   Best Roller Rockers
chomme
Member
posted December 03, 2003 08:18 AM
The Crower stainless Enduro Centerline Roller Rocker for springs up to 1.560" in diameter and valves .100" + longer than stock length . Use the Crower Long Arm backset trunion roller rockers on anything with a spring diameter above 1.560". All are available with ratio's from 1.5 to 1.9 . Just like their roller lifter's , their stud mount rockers are the best made today.

Steve

------------------
Hendren Racing Engines
Rutherfordton , NC
(828)286-0780


goinrcn44h
Member
posted December 04, 2003 11:08 AM
I ran the crower stud mount 7/16 stainless magnums all year in my 360 sprint engine with zero problems all year. I just did lash every race to every other, and used a good stud girdle and consistently turned 8000 to 8300 without so much as a wimper. I have been seriously considering going shaft mount but I am torn, I come from the "if it aint broke don't fix it school" I seen several broken T & D and Jesel rockers, w/ guys runnin similar RPM's. I am actually still undecided. We will see how the fundage pans out....
44H


Back to the Archives