Visit The Dirt Forum for More Information

Author Topic:   CAMS???
Nobra14
Member
posted November 21, 2003 01:02 PM
SBC 355, 2 bbl carb, hydraulic cam. Need info on strong cam that will pull 16" vacumn at 1000 rpm's.


cmiller51
Member
posted November 21, 2003 09:15 PM
Comp 12-242-2. This cam will definately pull vacuum. Ran good in my friends 355.


waltonjr1
Member
posted November 22, 2003 01:52 PM
Thats the same cam i run.It pulls real hard.Its suppose to be good to 5800 but i run it about 6200 and its still pulling.I pull about 18" at a thousand with h/p lifters.When i had anti pumps it pulled 23"but I took them out b/c I did not need that much vaccum.

------------------
DEANJR#22


cmiller51
Member
posted November 22, 2003 09:52 PM
I think it's a fairly common vacuum cam. Runs well in mild 350's.


Nobra14
Member
posted November 23, 2003 08:29 AM
THANKS EVERYONE................


Back to the Archives