Visit The Dirt Forum for More Information

Author Topic:   Roller cam in 85 350?
ProZ05
Member
posted October 16, 2003 09:33 AM
on a 350 do you have to machine or do anything special to run a solid roller cam?

Chris

eighty
Member
posted October 16, 2003 10:48 PM
Just make sure you run the springs to match the cam, Most roller springs are not the stock diameter, so you will need to have your machinist to open it up and have him set your spring height up while he is at it, I am unaware if there is more machining for the lifters,etc....................


eighty
Member
posted October 16, 2003 10:55 PM
Just make sure you run the springs to match the cam, Most roller springs are not the stock diameter, so you will need to have your machinist to open it up and have him set your spring height up while he is at it, I am unaware if there is more machining for the lifters,etc....................


Back to the Archives