Visit The Dirt Forum for More Information

Author Topic:   rev-limiting HEI module
BrianW
Member
posted September 25, 2003 11:55 AM
Has anyone run the rev-limiting HEI module? If so has it been reliable?

I can't remember who it's made by - but it's a printed circuit board with a set of dip-switches to set the rev-limit and it drops in where the HEI module screws to...

SLEEPY GOMEZ
Member
posted September 25, 2003 10:12 PM
I got my HEI rev limiter from Performance Distributors, Memphis. It was not the inside module but was wired on the outside. Came with plug in chips to select RPM. It worked fine. Call Steve at 901-396-5782. SLEEPY


sbc350
Member
posted September 25, 2003 11:47 PM
Mallory had it on display at some show last winter. There was a picture of it in Circle Track mag. I haven't been able to find one sold anywhere but maybe if you call Mallory they can tell you if they're being sold now.


BrianW
Member
posted September 26, 2003 03:44 PM
I've used the MSD external rev-limiter, but was thinking that the internal one by Mallory?? Might be cleaner and more reliable if it's all inside the distributor... For now I guess the external stuff works...

I was more curious if anyone has run a seson on one and didn't have failures...

- Brian

Back to the Archives