Visit The Dirt Forum for More Information

Author Topic:   need help on heads
racerdave99
Member
posted August 07, 2003 05:30 PM
i just bought a set of 461 300 horse heads with screw in studs . what should i torque my studs at and what would be the best spark plug to run with 112 octain racing fuel?

thanks david

sdhnc29
Member
posted August 07, 2003 10:15 PM
45-50 lbs on the rocker stud's . I'd use blue Loctite on the threads . If I remember right , the Autolite 353 is a good plug to use .

Steve

------------------
Hendren Racing Engines
Rutherfordton , NC
(828)286-0780


Flanndad
Member
posted August 13, 2003 03:18 PM
Just be sure to get your heads checked, I put a set of 461's on mine and wrecked the engine, dropped a valve, after the cylinder filled with water.

When I was calling around looking for a replacement head, one on the machine shop's mentioned that he throw's away 1/3rd of the 461's he gets. Because they are cracked.

Back to the Archives