Visit The Dirt Forum for More Information

Author Topic:   Torque specs
jhon hollomon
Member
posted August 02, 2003 04:59 PM
Hello all. can anybody tell me what to torque heads to that are on a 351w ford?? What about the intake?? Thanks.


dragonfly
Member
posted August 02, 2003 05:29 PM
Ford 351 Windsor
Fastener Type
Torque Spec.

Main cap bots 95-105 ft.-lbs.
Connecting rod bolts 40-45 ft.-lbs
Cylinder head bolts (follow factory torque sequence) 90-100 ft.-lbs.
Rocker arms 17-23 ft.-lbs.
Intake manifold bolts 23-25 ft.-lbs.
Oil pump bolt 23-28 ft.-lbs.
Cam bolts 40-45 ft.-lbs.
Cam thrust plate bolts 8-10 ft.-lbs.
Harmonic damper bolt 70-90 ft.-lbs.
Flywheel/ flexplate bolts 75-85 ft.-lbs.
Pressure plate bolts 35 ft.-lbs.
Front cover bolts 12-15 ft.-lbs. http://www.classictruckshop.com/bt351W.asp
hope this helps


jhon hollomon
Member
posted August 02, 2003 05:34 PM
Thanks. That helps a ton. Is the torque sequence similar to a chevy?? From the inside out criscrossing??


Back to the Archives