Visit The Dirt Forum for More Information

Author Topic:   350 with 2.08 valves?
posted July 30, 2003 12:49 AM
With iron eagle heads will the 2.08 fit in a 350 block? Will i benifit by using the bigger valve...on a big track?

posted July 30, 2003 01:51 PM
The gain is minimal unless you un-shroud the chamber . Unfortunately un-shrouding the chamber will gain CC's . So you would have to cut your heads more , or change piston dome volume . If it were me , It's use the 2.055"/1.625" valves .


Hendren Racing Engines
Rutherfordton , NC

Back to the Archives