Visit The Dirt Forum for More Information

Author Topic:   Rocker Arm Studs
ARR
Member
posted July 20, 2003 09:45 PM
Check the stud boss where the stud presses in, sometimes the head will crack there and the stud will start pulling out. Sometimes when this happens it will leak coolent though. If it is cracked an oversize stud will only make the crack worse. You might be able to get away with the factory style thread-in studs, you don't have to cut the stud boss down and it looks like a pressed in stud. Just an idea.


Geffy95x
Member
posted July 23, 2003 02:53 PM
Red lock-tite should help cure problem.


ruggs66
Member
posted July 24, 2003 12:08 AM
what about trying the screw in studs that Do Not have the jam nut?

they look stock when installed properly!

Jegs sells them for only $27.99



Back to the Archives