Visit The Dirt Forum for More Information

Author Topic:   has anyone done this?need help
wizzard
Member
posted July 04, 2003 06:11 PM
Red wire is ign,white wire is supposed to be hot in the start position(wire together?)orange and purple should be the pickup signal wires from the dist.If it uses a magnetic style pickup similar to a HEI dist i'd use a GM module and enclose it on the firewall in a box,did this to a 280Z and it really worked good.


wizzard
Member
posted July 06, 2003 12:50 PM
Looking down into the dist the connections on the right go to the pickup coil and the ones on the left go to the coil,the one closest to the outside goes to the coil negative and tach,the other is the positive side.The pickup coil wires can be wired either way.


wizzard
Member
posted July 07, 2003 05:56 PM
cool thank's rico ill give it a try


Back to the Archives