Visit The Dirt Forum for More Information

Author Topic:   how to find cam lift???
BK19
Member
posted June 29, 2003 03:22 AM
there is a formula to figure out the lift on a cam taking the heigth by width of the lobe, do you divide or what?


ctfarm
Member
posted June 29, 2003 03:48 AM
Subtract the width from the height,this will give lift at the cam,then multiply the rocker ratio to get the lift at valve.



BK19
Member
posted June 29, 2003 11:48 AM
thank you very much


Back to the Archives