Visit The Dirt Forum for More Information

Author Topic:   Cam question
nut3d
Member
posted June 25, 2003 10:58 PM
I'm bout to build a new motor and was gonna go with a Midwest Motosports kit and was wondering if the #4 cam was any good???????


ford5
Member
posted June 26, 2003 07:40 AM
i have had excellent results with the Speedway tight lash grinds, they are made by Bullet cams out of Tennessee, and they are very good performers, for i think 79 bucks?
sorry jammin, i know speedway is a bad word here.......... lol


ctfarm
Member
posted June 26, 2003 02:31 PM
We run the Elgin E1090P from Day Motorsports.Cam and lifters are about a 100 bucks.Works great on 1/4-3/8 mile tracks.


factory58
Member
posted June 26, 2003 03:21 PM
guess it depends on what ya want i run midwest motors #7 in both my motors


Tim Weiss
Member
posted June 26, 2003 03:46 PM
We run the midwest#2 in our 3000 lb camaro clip car in a 406 motor on alky seems to work real well for us


nut3d
Member
posted June 26, 2003 03:55 PM
I'm runnin a Mod on gas and my track is always Dry Slick at feature time. it's a high banked 3/8 track.


Back to the Archives