Visit The Dirt Forum for More Information

Author Topic:   Camshaft Selection
dasher31
Member
posted May 06, 2003 09:17 PM
I need help with Camshaft Selection please!! I run a 350 sbc, 0.030 overbore, flattop pistons, stock rods, cast crank, 441 heads (74cc chamber), edelbrock performer 2101 aluminum 4 barrell intake, holley 4412 carb on a medium banked 1/3 mile clay track. Run average 4200-6000 rpm's and camshaft has to be hydraulic. Also, can you run hydraulic lifters on a solid cam?


racer17j
Member
posted May 06, 2003 09:34 PM
yes you can run hydro lifters on a solid cam but it's kinda touchy set up you gotta have it just right or you have a flat cam i run a speed pro 187r cam got it from jr motorsports works great you'll have to turn it more than 6000 tho i turn mine 6400 it's a 510 lift and 244 dur @.050 108 centers have about 5 cars at our track running it and we are all front runners


Back to the Archives