Visit The Dirt Forum for More Information

Author Topic:   pm rod?
garyl
Member
posted April 30, 2003 08:26 AM
need advise, will the gm powdered metal rods hold up in a2bbl 350 at 7100 to 7500 rpm . about 375 to 400 hp 12 to 1 comp.?


rico 08
Member
posted April 30, 2003 04:13 PM
Hmmm they are really new and there's not alot out there as far as how much they will take,some say don't run them as instead of bending like the standard rods do they break so be careful.My opinion is you are ok except for the 12-1 compression,that's too much for any stock style rod at that rpm.IMHO


66jj
Member
posted April 30, 2003 09:32 PM
new, i have been using them since end of 98, i would recomend scat i beams or even a prowler etc, they are stronger and the same wt... and cheaper than, pm rods.

new pms are 200,on up bushed

scat or import from comp products are 190 bushed to 220.. and way stronger.

jeff

Back to the Archives