Visit The Dirt Forum for More Information

Author Topic:   4412 Float Problems
smallrock98
Member
posted April 29, 2003 02:22 PM
I have a see through sight plug on my carb. I can only set the float level only halfway down through the site plug. It just wont go down anymore. Yes, I am turning the nut clockwise. Anyone else ever have a problem with this? I was told that something might be plugging up the carb. Engine is missing at 4000 rpm with total advance set at 34 degrees. Spark plug does not look rich or lean.........just clean Well, if I have to choose I would say it's lean. Oh, I am also running AV gas. Engine is 10.5 to 1. Please help.


Drogo99
Member
posted April 29, 2003 03:13 PM
Pull it off and check that the spring on the float arm hasn't "sprung", mine did more like wedged in there and the float did the same thing.


Back to the Archives