posted April 18, 2003 11:22 AM
I have basically stock 350 with a rebuilt 2 barell on it. at idle it runs good and when its in park and i rev it the car runs fine but when i put it and gear and go it backfires out of the carb and pops alot. Whats my problem where do i start? i need help! first race is tomorrow!! Thanks!!
posted April 18, 2003 03:02 PM
Just drove it around and when i hit the throttle it has a stammer then when i mash on the gas the car cuts off then if i let off the throttle it stays running. whats the problem!?! someone please help!!! Thanks!!
posted April 18, 2003 03:15 PM
Could be a LOT of things - - Your Timing may be way off? (what's it at with any vacuum advance unplugged & plugged in? - Vacuum advance not connected to the proper port (if you're running it) - Vacuum leak on manifold or base of carb... - Cam timing off or jumped a tooth. - Firing order not matching cam... - Valve lash set way too tight hanging a valve open.
Start with the basics and re-check everything one at a time.
posted April 18, 2003 04:55 PM
Thanks! i started with checking the plug wires and got lucky! One of my helpers who wired it crossed up a wire or two. Runs MINT now! Thanks alot for your help!!