Visit The Dirt Forum for More Information

Author Topic:   Stock Chevy 1.6 ratio rockers?
RangeRover
Member
posted April 14, 2003 09:48 PM
there are aftermarket 1.6 stamped rocker arms for chevy small block


outlawstock17
Member
posted April 15, 2003 07:40 AM
try a ford '65 289 "rail less" rocker. they're cast iron, light and much more durable than a stamped steel rocker.


sdhnc29
Member
posted April 15, 2003 10:10 PM
You can also go to a 7/16 Scr@w-in stud and use a stock pontiac rocker .

Steve

------------------
Hendren Racing Engines
Rutherfordton , NC
(828)286-0780


RangeRover
Member
posted April 16, 2003 11:04 PM
Most all of the aftermarket 1.6 rockers look identical to the 1.5s.


towmandan
Member
posted April 18, 2003 08:42 AM
All the after mkt. 1.6 rockers I have seen look just like stock rockers this is an old trick they came up with yrs. ago I dont think you will have any trouble running them another advantage most of them are long slotted to alow more clearance on valve lift...hope this helps towman....


Back to the Archives