Visit The Dirt Forum for More Information

Author Topic:   4412 HELP!
martnracn_91
Member
posted April 09, 2003 12:27 AM
I was just wondering if anyone could tell me what a good starting point would be for my mixture screws on a 4412 would be? Thanks for any help.


Flanndad
Member
posted April 09, 2003 06:40 AM
i JUST REBUILT MY HOLLEY 750 (4779), AND THEY SAID TO ***** THEM TIGHT AND THEN BACK THEM UP 1-1/2 TURNS.
nOT SURE IF IT'S THE SAME FOR THE 4412.


racer1030
Member
posted April 09, 2003 07:04 AM
DO NOT!!!!! ***** them in tight.You will damage the needles or the metering blocks.Just make them snug and then back them off 11/2 to 2 turns.


martnracn_91
Member
posted April 09, 2003 02:11 PM
Thanks for the help you guys.I was close, Ijust wanted to hear somone elses opinion. Thanks. "checker or wrecker"


Back to the Archives