Visit The Dirt Forum for More Information

Author Topic:   Rocker Arm Swap
ars
Member
posted February 13, 2003 04:38 AM
they work quite well and they're 1.6 ratio. use the early 289 "non-rail" rocker arms on your sbc. they are cast iron, light and tough as nails.

IMCA guys have been doing this for years on their claimer engines.

ars
Member
posted February 13, 2003 10:21 AM
yes, the stock length pushrods will work unless you've changed the length of the valves or milled the heads/block a bunch. fords and chevys both use a 5/16" pushrod so no problem there.


Back to the Archives