Visit The Dirt Forum for More Information

Author Topic:   283 VENT TUBE?
RACEINMUD
Member
posted February 05, 2003 03:21 PM
Hi, I have a 1958 283 block that I was thinking of trying in my stock bomber. I don't have the vent tube that is in the back of block. Is it needed and if so where can I get one. I'm running a 3.08 gear with a t350 on a 1/4 bank dirt, was thinking the 283 could turn more R's than my 350. Any help will be sincerely appreciated! Leon


ctfarm
Member
posted February 05, 2003 05:26 PM
Put a plug it it.The valve cover breathers will do the job.


Monster
Member
posted February 05, 2003 06:41 PM
RPM ain't everything. There is no replacement for displacement. Quick story: ARCA/Remax car, young driver, has been turning 7800rpm or so at short tracks, qualifying in mid field. We go to St. Louis, his first restrictor plate track. Practice, he's turning mid field lap times, all of a sudden, times increase by about 2 seconds a lap. Seems he did not like turning "only" 6400rpm, so puts car in third gear, to "get the rpm back up where it needed to be"!! True story, but he knows better now. The point is, it's the MOST torque under the curve that counts, whether that occurs from 3500-5500rpm, or 8500-10500. That block may be worth something to a collector or restoration guy.


FirstLight7
Member
posted February 05, 2003 11:46 PM
the back of the block? i beleive you are referring to the can that lays in the intake,the older motors use this to let the bottom end breathe,you should be able to find one in a junkyard.


DMS CEO
Member
posted February 06, 2003 10:04 AM
put a freeze plug in it and let it bump.


RACEINMUD
Member
posted March 22, 2003 05:49 PM
Ok, still working on this thing. The balancer is just pressed on with no bolt to hold it. Will this be a problem. Also, moved to a powerglide tranny so my final gear should be 5.61. OK? Thanks!


rico 08
Member
posted March 22, 2003 07:30 PM
nope that sounds more like a half mile track gear,i'd guess you need something like a 6.50 gear or deeper.


Flatlander
Member
posted March 22, 2003 10:36 PM
that gear would work if you ran tiny tires like a 74-75 in roll but i'm willing to bet yuo run some taller ones than that


wermm
Member
posted March 23, 2003 09:45 PM
this may sound like a dumb ? but how do you figure the final ratio. I was told the tranny plus the rear but this doesn't jive with what you guys are saying. What am I missing?


RACEINMUD
Member
posted March 24, 2003 09:02 AM
Hi Racer, Yeah it is tough to find little tires. I'm running 205/70/15 on 8" rims. It is about an 82 roll. I'm going try anf find some 3.73 gears on Ebay. Should get me to 6.80. Thanks!

[This message has been edited by RACEINMUD (edited March 24, 2003).]

dode
Member
posted March 24, 2003 02:07 PM
final ratio = trans ratio X rear end ratio

John

wermm
Member
posted March 26, 2003 12:16 PM
thanks Dode, the prob. was mine. I was adding instead of multiplying. Duh


Back to the Archives